The Solid State of Matter (2022)

Learning Objectives

By the end of this section, you will be able to:

  • Define and describe the bonding and properties of ionic and molecular metallic and covalent network crystalline solids
  • Describe the main types of crystalline solids: ionic solids, metallic solids, covalent network solids, and molecular solids
  • Explain the ways in which crystal defects can occur in a solid

When most liquids are cooled, they eventually freeze and form crystalline solids, solids in which the atoms, ions, or molecules are arranged in a definite repeating pattern. It is also possible for a liquid to freeze before its molecules become arranged in an orderly pattern. The resulting materials are called amorphous solids or noncrystalline solids (or, sometimes, glasses). The particles of such solids lack an ordered internal structure and are randomly arranged (Figure1).

The Solid State of Matter (1)

Figure 1. The entities of a solid phase may be arranged in a regular, repeating pattern (crystalline solids) or randomly (amorphous).

Metals and ionic compounds typically form ordered, crystalline solids. Substances that consist of large molecules, or a mixture of molecules whose movements are more restricted, often form amorphous solids. For examples, candle waxes are amorphous solids composed of large hydrocarbon molecules. Some substances, such as boron oxide (shown in Figure2), can form either crystalline or amorphous solids, depending on the conditions under which it is produced. Also, amorphous solids may undergo a transition to the crystalline state under appropriate conditions.

The Solid State of Matter (2)

Figure2. (a) Diboron trioxide, B2O3, is normally found as a white, amorphous solid (a glass), which has a high degree of disorder in its structure. (b) By careful, extended heating, it can be converted into a crystalline form of B2O3, which has a very ordered arrangement.

(Video) States of Matter - Solids, Liquids, Gases & Plasma - Chemistry

Crystalline solids are generally classified according the nature of the forces that hold its particles together. These forces are primarily responsible for the physical properties exhibited by the bulk solids. The following sections provide descriptions of the major types of crystalline solids: ionic, metallic, covalent network, and molecular.

Ionic Solids

The Solid State of Matter (3)

Figure3. Sodium chloride is an ionic solid.

Ionic solids, such as sodium chloride and nickel oxide, are composed of positive and negative ions that are held together by electrostatic attractions, which can be quite strong (Figure3). Many ionic crystals also have high melting points. This is due to the very strong attractions between the ions—in ionic compounds, the attractions between full charges are (much) larger than those between the partial charges in polar molecular compounds. This will be looked at in more detail in a later discussion of lattice energies. Although they are hard, they also tend to be brittle, and they shatter rather than bend. Ionic solids do not conduct electricity; however, they do conduct when molten or dissolved because their ions are free to move. Many simple compounds formed by the reaction of a metallic element with a nonmetallic element are ionic.

Metallic Solids

Metallic solids such as crystals of copper, aluminum, and iron are formed by metal atoms Figure4. The structure of metallic crystals is often described as a uniform distribution of atomic nuclei within a “sea” of delocalized electrons. The atoms within such a metallic solid are held together by a unique force known as metallic bonding that gives rise to many useful and varied bulk properties. All exhibit high thermal and electrical conductivity, metallic luster, and malleability. Many are very hard and quite strong. Because of their malleability (the ability to deform under pressure or hammering), they do not shatter and, therefore, make useful construction materials. The melting points of the metals vary widely. Mercury is a liquid at room temperature, and the alkali metals melt below 200 °C. Several post-transition metals also have low melting points, whereas the transition metals melt at temperatures above 1000 °C. These differences reflect differences in strengths of metallic bonding among the metals.

Covalent network solids include crystals of diamond, silicon, some other nonmetals, and some covalent compounds such as silicon dioxide (sand) and silicon carbide (carborundum, the abrasive on sandpaper). Many minerals have networks of covalent bonds. The atoms in these solids are held together by a network of covalent bonds, as shown in Figure5.To break or to melt a covalent network solid, covalent bonds must be broken. Because covalent bonds are relatively strong, covalent network solids are typically characterized by hardness, strength, and high melting points. For example, diamond is one of the hardest substances known and melts above 3500°C.

The Solid State of Matter (5)

Figure5. A covalent crystal contains a three-dimensional network of covalent bonds, as illustrated by the structures of diamond, silicon dioxide, silicon carbide, and graphite. Graphite is an exceptional example, composed of planar sheets of covalent crystals that are held together in layers by noncovalent forces. Unlike typical covalent solids, graphite is very soft and electrically conductive.

(Video) States of matter for kids - What are the states of matter? Solid, liquid and gas

Molecular Solid

Molecular solids, such as ice, sucrose (table sugar), and iodine, as shown in Figure6, are composed of neutral molecules. The strengths of the attractive forces between the units present in different crystals vary widely, as indicated by the melting points of the crystals. Small symmetrical molecules (nonpolar molecules), such as H2, N2, O2, and F2, have weak attractive forces and form molecular solids with very low melting points (below −200 °C). Substances consisting of larger, nonpolar molecules have larger attractive forces and melt at higher temperatures. Molecular solids composed of molecules with permanent dipole moments (polar molecules) melt at still higher temperatures. Examples include ice (melting point, 0 °C) and table sugar (melting point, 185°C).

The Solid State of Matter (6)

Figure6. Carbon dioxide (CO2) consists of small, nonpolar molecules and forms a molecular solid with a melting point of −78 °C. Iodine (I2) consists of larger, nonpolar molecules and forms a molecular solid that melts at 114 °C.

Properties of Solids

A crystalline solid, like those listed in Table1, has a precise melting temperature because each atom or molecule of the same type is held in place with the same forces or energy. Thus, the attractions between the units that make up the crystal all have the same strength and all require the same amount of energy to be broken. The gradual softening of an amorphous material differs dramatically from the distinct melting of a crystalline solid. This results from the structural nonequivalence of the molecules in the amorphous solid. Some forces are weaker than others, and when an amorphous material is heated, the weakest intermolecular attractions break first. As the temperature is increased further, the stronger attractions are broken. Thus amorphous materials soften over a range of temperatures.

Table1. Types of Crystalline Solids and Their Properties
Type of SolidType of ParticlesType of AttractionsPropertiesExamples
ionicionsionic bondshard, brittle, conducts electricity as a liquid but not as a solid, high to very high melting pointsNaCl, Al2O3
metallicatoms of electropositive elementsmetallic bondsshiny, malleable, ductile, conducts heat and electricity well, variable hardness and melting temperatureCu, Fe, Ti, Pb, U
covalent networkatoms of electronegative elementscovalent bondsvery hard, not conductive, very high melting pointsC (diamond), SiO2, SiC
molecularmolecules (or atoms)IMFsvariable hardness, variable brittleness, not conductive, low melting pointsH2O, CO2, I2, C12H22O11

Graphene: Material of the Future

Carbon is an essential element in our world. The unique properties of carbon atoms allow the existence of carbon-based life forms such as ourselves. Carbon forms a huge variety of substances that we use on a daily basis, including those shown in Figure7. You may be familiar with diamond and graphite, the two most common allotropes of carbon. (Allotropes are different structural forms of the same element.) Diamond is one of the hardest-known substances, whereas graphite is soft enough to be used as pencil lead. These very different properties stem from the different arrangements of the carbon atoms in the different allotropes.

The Solid State of Matter (7)

(Video) Solid | Properties of Solid | State of Matter | Let's Learn Science | Yourdaisteny

Figure7. Diamond is extremely hard because of the strong bonding between carbon atoms in all directions. Graphite (in pencil lead) rubs off onto paper due to the weak attractions between the carbon layers. An image of a graphite surface shows the distance between the centers of adjacent carbon atoms. (credit left: modification of work by Steve Jurvetson; credit middle: modification of work by United States Geological Survey)

You may be less familiar with a recently discovered form of carbon: graphene. Graphene was first isolated in 2004 by using tape to peel off thinner and thinner layers from graphite. It is essentially a single sheet (one atom thick) of graphite. Graphene, illustrated in Figure8, is not only strong and lightweight, but it is also an excellent conductor of electricity and heat. These properties may prove very useful in a wide range of applications, such as vastly improved computer chips and circuits, better batteries and solar cells, and stronger and lighter structural materials. The 2010 Nobel Prize in Physics was awarded to Andre Geim and Konstantin Novoselov for their pioneering work with graphene.

Crystal Defects

In a crystalline solid, the atoms, ions, or molecules are arranged in a definite repeating pattern, but occasional defects may occur in the pattern. Several types of defects are known, as illustrated in Figure9. Vacancies are defects that occur when positions that should contain atoms or ions are vacant. Less commonly, some atoms or ions in a crystal may occupy positions, called interstitial sites, located between the regular positions for atoms. Other distortions are found in impure crystals, as, for example, when the cations, anions, or molecules of the impurity are too large to fit into the regular positions without distorting the structure. Trace amounts of impurities are sometimes added to a crystal (a process known as doping) in order to create defects in the structure that yield desirable changes in its properties. For example, silicon crystals are doped with varying amounts of different elements to yield suitable electrical properties for their use in the manufacture of semiconductors and computer chips.

The Solid State of Matter (9)

Figure9. Types of crystal defects include vacancies, interstitial atoms, and substitutions impurities.

Key Concepts and Summary

Some substances form crystalline solids consisting of particles in a very organized structure; others form amorphous (noncrystalline) solids with an internal structure that is not ordered. The main types of crystalline solids are ionic solids, metallic solids, covalent network solids, and molecular solids. The properties of the different kinds of crystalline solids are due to the types of particles of which they consist, the arrangements of the particles, and the strengths of the attractions between them. Because their particles experience identical attractions, crystalline solids have distinct melting temperatures; the particles in amorphous solids experience a range of interactions, so they soften gradually and melt over a range of temperatures. Some crystalline solids have defects in the definite repeating pattern of their particles. These defects (which include vacancies, atoms or ions not in the regular positions, and impurities) change physical properties such as electrical conductivity, which is exploited in the silicon crystals used to manufacture computer chips.

(Video) States of Matter : Solid Liquid Gas


  1. What types of liquids typically form amorphous solids?
  2. At very low temperatures oxygen, O2, freezes and forms a crystalline solid. Which best describes these crystals?
    1. ionic
    2. covalent network
    3. metallic
    4. amorphous
    5. molecular crystals
  3. As it cools, olive oil slowly solidifies and forms a solid over a range of temperatures. Which best describes the solid?
    1. ionic
    2. covalent network
    3. metallic
    4. amorphous
    5. molecular crystals
  4. Explain why ice, which is a crystalline solid, has a melting temperature of 0 °C, whereas butter, which is an amorphous solid, softens over a range of temperatures.
  5. Identify the type of crystalline solid (metallic, network covalent, ionic, or molecular) formed by each of the following substances:
    1. SiO2
    2. KCl
    3. Cu
    4. CO2
    5. C (diamond)
    6. BaSO4
    7. NH3
    8. NH4F
    9. C2H5OH
  6. Identify the type of crystalline solid (metallic, network covalent, ionic, or molecular) formed by each of the following substances:
    1. CaCl2
    2. SiC
    3. N2
    4. Fe
    5. C (graphite)
    6. CH3CH2CH2CH3
    7. HCl
    8. NH4NO3
    9. K3PO4
  7. Classify each substance in the table as either a metallic, ionic, molecular, or covalent network solid:
    SubstanceAppearanceMelting PointElectrical ConductivitySolubility in Water
    Xlustrous, malleable1500 °Chighinsoluble
    Ysoft, yellow113 °Cnoneinsoluble
    Zhard, white800 °Conly if melted/dissolvedsoluble
  8. Classify each substance in the table as either a metallic, ionic, molecular, or covalent network solid:
    SubstanceAppearanceMelting PointElectrical ConductivitySolubility in Water
    Xbrittle, white800 °Conly if melted/dissolvedsoluble
    Yshiny, malleable1100 °Chighinsoluble
    Zhard, colorless3550 °Cnoneinsoluble
  9. Identify the following substances as ionic, metallic, covalent network, or molecular solids:
    1. Substance A is malleable, ductile, conducts electricity well, and has a melting point of 1135 °C.
    2. Substance B is brittle, does not conduct electricity as a solid but does when molten, and has a melting point of 2072 °C.
    3. Substance C is very hard, does not conduct electricity, and has a melting point of 3440 °C.
    4. Substance D is soft, does not conduct electricity, and has a melting point of 185 °C.
  10. Substance A is shiny, conducts electricity well, and melts at 975 °C. Substance A is likely a(n):
    1. ionic solid
    2. metallic solid
    3. molecular solid
    4. covalent network solid
  11. Substance B is hard, does not conduct electricity, and melts at 1200 °C. Substance B is likely a(n):
    1. ionic solid
    2. metallic solid
    3. molecular
    4. covalent network solid

Show Selected Answers


amorphous solid: (also, noncrystalline solid) solid in which the particles lack an ordered internal structure

covalent network solid: solid whose particles are held together by covalent bonds

crystalline solid: solid in which the particles are arranged in a definite repeating pattern

interstitial sites: spaces between the regular particle positions in any array of atoms or ions

ionic solid: solid composed of positive and negative ions held together by strong electrostatic attractions

metallic solid: solid composed of metal atoms

molecular solid: solid composed of neutral molecules held together by intermolecular forces of attraction

vacancy: defect that occurs when a position that should contain an atom or ion is vacant

(Video) What Is Matter? - The Dr. Binocs Show | Best Learning Videos For Kids | Peekaboo Kidz


The Solid State of Matter? ›

A solid is a state of matter that retains its shape and density when not confined.

What is an example of a solid state of matter? ›

Solids are sometimes formed when liquids or gases are cooled; ice is an example of a cooled liquid which has become solid. Other examples of solids include wood, metal, and rock at room temperature.

What is solid state Class 9? ›

Solid-state is a state of matter in which the particles are packed tightly. The constituent particles can be atoms or solid. Properties of solid: i) Solid have definite mass, volume, and shape. ii) Intermolecular distances between the solid particles are short and hence the forces of attraction are strong.

What is solid state in simple words? ›

Solid state, at its most basic level, means "no moving parts." Therefore, solid state electronic devices are made up of solid components that do not move. Some examples include computer motherboards and integrated circuits.

What are 5 examples of solids? ›

Examples of Solids
  • Gold.
  • Wood.
  • Sand.
  • Steel.
  • Brick.
  • Rock.
  • Copper.
  • Brass.
Jan 24, 2020

What are types of solid? ›

Solids are divided into two main categories, crystalline solids and amorphous solids, based on how the particles are arranged.
  • Crystalline solids. ...
  • Types of crystalline solids. ...
  • Ionic solids. ...
  • Molecular solids. ...
  • Network covalent solids. ...
  • Metallic solids. ...
  • Amorphous solids. ...
  • Additional resources.
Jul 22, 2014

What is properties of solid? ›

♣ Properties of solids:

1) solid have a fixed shape and a fixed volume. 2) solid cannot be compressed. 3) solids have high density. 4) force of attraction between the particles in solid is very strong. 5) The space between the particles of solids is negligible.

What are the 4 properties of solids? ›

Properties of Solids
  • Electrical and thermal conductivity.
  • Malleability and ductility.
  • Melting point.
  • Solubility.

Why is it called solid state? ›

Solid-state gets its name from the path that electrical signals take through solid pieces of semi-conductor material. Prior to the use of solid-state devices, such as the common transistor, electricity passed through the various elements inside of a heated vacuum tube.

Why is matter solid? ›

A solid forms from liquid or gas because the energy of atoms decreases when the atoms take up a relatively ordered, three-dimensional structure. Solids exhibit certain characteristics that distinguish them from liquids and gases.

What are three characteristics of a solid? ›

Solids are defined by the following characteristics:
  • Definite shape (rigid)
  • Definite volume.
  • Particles vibrate around fixed axes.
Jul 1, 2019

What is solid used for? ›

Uses of Solids

Solids can be hard (cement, for example) or soft (gold); brittle (eggshells), malleable (copper), or elastic (rubber); heavy (lead) or light (balsa wood). Some solids are good conductors of heat and electricity; others are insulators.

What is another example of a solid? ›

Synthetic gems are the examples of solid solid system. Smoke is solid in gas, coke is gas in liquid and pumice stone is gas in solid.

What is a solid element? ›

Solid Element exposes Component Register's Hot Module Replacement solution for Webpack and Parcel. It does not preserve state, swapping Components that are changed and their descendants. This approach is simple but predictable.

How many types are solid? ›

There are two types of solids, and they are: Crystalline solids. Amorphous solids.

How do you identify a solid? ›

Ionic Solids, Molecular Solids, Metallic Solids, Network Covalent Solids ...

Why is a solid hard? ›

Solids are rigid because of the inter molecular forces of attraction present in the solid. The inter molecular forces existing among the particles are very strong. The movement of particles in solids is almost negligible because of small intermolecular space and thus solids are rigid and hard in nature.

What are the four types of solids? ›

The major types of solids are ionic, molecular, covalent, and metallic.

What are the two features of solids? ›

The properties of the solid state are as follows:
  • Solids have definite shape and volume.
  • Solids possess rigidity.
  • They cannot be compressed too much.
  • The particles are closely packed.
  • They cannot flow.

What are the 5 characteristics of matter? ›

Early Indian philosophers classified matter in the form of five basic elements – the 'Panch Tatva' -air, earth, fire, sky and water. Even though matter can be found all over the Universe, you only find it in a few forms, based on their physical and chemical properties.

What are particles of solid? ›

Solids, liquids, and gases are made of tiny particles called atoms and molecules. In a solid, the particles are very attracted to each other. They are close together and vibrate in position but don't move past one another.

What are 5 characteristics of a solid? ›

  • solid have a fixed shape and a fixed volume.
  • solid cannot be compressed.
  • solids have high density.
  • force of attraction between the particles is very strong.
  • The space between the particles of solids is negligible.

What are the six characteristics of solids? ›

Definite shape, definite volume, definite melting point, high density, incompressibility, and low rate of diffusion.

What are the two general types of solid? ›

There are two main classes of solids: crystalline and amorphous.

Who discovered solid-state? ›

Michael Faraday was also the first to discover electrolytes that were not liquid, but solid. In 1834, he recorded the following observation [1]:

Who invented solid-state? ›

Solid-state drive
Usage of flash memory
Introduced by:SanDisk
Introduction date:1991
Capacity:20 MB (2.5-in form factor)
Original concept
6 more rows

What is a solid state memory? ›

Solid-state storage (SSS) is a type of computer storage media that stores data electronically and has no moving parts. Solid state storage is made from silicon microchips. Because there are no moving parts, SSDs require less power and produce far less heat than spinning hard disk drives or magnetic tape.

What are 10 examples matter? ›

What are 10 examples matter?
  • An apple.
  • A person.
  • A table.
  • Air.
  • Water.
  • A computer.
  • Paper.
  • Iron.

What are the 3 states of matter with examples? ›

There are three common states of matter:
  • Solids – relatively rigid, definite volume and shape. In a solid, the atoms and molecules are attached to each other. ...
  • Liquids – definite volume but able to change shape by flowing. In a liquid, the atoms and molecules are loosely bonded. ...
  • Gases – no definite volume or shape.

What are 7 states of matter? ›

The seven states of matter that I am investigating are Solids, Liquids, Gases, Ionized Plasma, Quark-Gluon Plasma, Bose-Einstein Condensate and Fermionic Condensate. Solid Definition - Chemistry Glossary Definition of Solid.

What are the 5 states of matter? ›

We look at five states of matter on the site. Solids, liquids, gases, plasmas, and Bose-Einstein condensates (BEC) are different states of matter that have different physical properties. Solids are often hard, liquids fill containers, and gases surround us in the air.


1. Doing Solids: Crash Course Chemistry #33
2. States of Matter for Kids | Solids, Liquids, and Gases
(Learn Bright)
3. The Solid State of Matter | OpenStax Chemistry 2e 10.5
(Michael Evans)
4. States Of Matter - Solids, Liquids & Gases | Properties of Matter | Chemistry | FuseSchool
(FuseSchool - Global Education)
5. States of Matter | Solid, Liquid and Gas | Chemistry
(Najam Academy)
6. States of Matter | #aumsum #kids #science #education #children
(It's AumSum Time)

You might also like

Latest Posts

Article information

Author: Jerrold Considine

Last Updated: 07/03/2022

Views: 6188

Rating: 4.8 / 5 (78 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Jerrold Considine

Birthday: 1993-11-03

Address: Suite 447 3463 Marybelle Circles, New Marlin, AL 20765

Phone: +5816749283868

Job: Sales Executive

Hobby: Air sports, Sand art, Electronics, LARPing, Baseball, Book restoration, Puzzles

Introduction: My name is Jerrold Considine, I am a combative, cheerful, encouraging, happy, enthusiastic, funny, kind person who loves writing and wants to share my knowledge and understanding with you.